Standard Spray Booth Paint Oven Car Spray Room Auto Baking Booth Wld-8200

• Customization: Available
• After-sales Service: Online and Others
• Warranty: 12 Months
• Model NO.: WLD8200
• Type: Spray Booth
• Certification: CE
• Substrate: EPS
• Brand: Wld
• Coating: Powder Coating
• Airflow Direction: Fully Undershot-type
• Heating Mode: Diesel
• Paint Mist Treatment: Dry-type
• Condition: New
• Product Description: Spray Booth
• Category Type: Standard
• Draft Pattern: Full-Down Draft
• Model: Wld-8200
• External Size(M): 7×5.54×3.45
• Internal Size(M): 6.9×3.9×2.7
• Air Recirculation: Internal Recirculation
• Application: Cars
• Paint Suited: Ordinary Paint
• Unit/Container: 1 Set/20FT Container
• Air Speed: 0.3m/S
• Air Flow: 20000m³/H
• Total Power: 12kw
• Heating System: Diesel Burner
• Lighting System: LED
• Transport Package: Export Standard
• Specification: Standard Type
• Trademark: WLD
• Origin: Guangzhou, China
• HS Code: 8419899090
• Production Capacity: 2, 000 PCS/Year

Product Description

Standard Spray Booth Paint Oven Car Spray Room Auto Baking Booth WLD-8200 

Product Description

A paint booth is a large, contained environment equipped with exhaust fans and filters to make commercial spray painting safer and cleaner. It improves results by altering air pressure to blow contaminants out of the container and clear out overspray from the paint sprayers. As it does this, fresh, clean air is consistently pushed into the booth.
 

Benefits of a Paint Booth:

• Improve results: A paint booth pulls contaminants out, helping you to achieve a smoother, cleaner coating. Some designs can even blow paint over uncoated areas to create a more uniform finish.
• Abide by regulations: You can play nice with the Environmental Protection Agency and meet or exceed their requirements regarding the dangerous chemicals involved in paint spraying. Plus, it can keep your employees safer by limiting their exposure.
• Reduce costs: With the right paint spray booth, you can lower the costs required to operate it. Improved coating quality can also minimize material and labor costs. You may need to use fewer layers and touch-ups.

A paint booth can offer the most professional-grade paint jobs possible. If you can't risk subpar coverage, then a paint booth is the way to go.

Specification for Standard Spray Booth Paint Oven Car Spray Room Auto Baking Booth WLD-8200:

Internal Size		L6900×W3900×H2700(mm)
External Size		L7000×W4000+1450×H3450(mm)
Room Body	Wall Panel	50mm thickness, sandwich panel, filled with flame retardant foam foam density18kg/m³, 0.426mm colorful steel skin board.
	Roof Panel	air chamber 450mm high, galvanized steel roof panel
Basement		300mm high, galvanized steel sheet and square steel pipe construction. 2 rows of grids, 3 rows of checker plates, 2pcs of ramps
Door	Front Door	3-folder structure luxury front door galvanized steel sheet thickness: 0.8mm with powder coating treatment, size: W3000×H2650(mm) with tempered glass windows
	Service Door	1pc, made of wall panelwith pressure lock & absovation windows,
Air Circulation System	Intake Fan	2 sets of 4KW centrifugal fans, air flow 24000m³/h
	Exhaust Fan	1 set of 5.5KW centrifugal fan
	Exhaust Duct	galvanized steel sheet, 3pcs straights 750×750×1000(mm), 1pc 90° elbow and 1pc 45° elbow
Heating System	Burner	Italy RIELLO G20 diesel burner, 200000Kcal/h, heating time 5-7min(20ºC-60ºC) Max. temperature 80ºC, fuel consumption 4-5kg/vehicle
		with oil tank & oil tank stand
	Chimeny	4pcs straights and 2pcs of elblows
	Heat Exchanger	made of 1.5mm stainless steel, exchange rate can reach 85%.
Filtering System		pre-filter, ceiling filter, floor filter, exhaust fan filter
Lighting System	Ceiling Light	32pcs of 24W LED lamp tubes
	Side Light	16pcs of 24W LED lamp tubes
Control System	Damper	BELIMO 20N electric damper
	Control box	Electronic control panel. Cabinet type, standard control system, easy to control and maintain.  Painting, drying, lighting, painting time and drying time setting ;emergency stop switch, failure indication, over-temperature alarm indication etc.

Detailed Photos

Real User Case

Company Profile

FAQ

Q1. What is your terms of packing?

A: Generally, we pack our goods by thicker bubble paper, some of them are packed by carton.

Q2. What is your terms of payment?
A: By T/T, 30% as deposit for production, and 70% balance before delivery. We'll show you the photos of the products and packages before you pay the balance.

Q3. What is your terms of delivery?
A: Normally our quotation is under FOB Guangzhou, but we also accept EXW, FOB, CFR, CIF, DDU. 

Q4. How about your delivery time?
A: Generally, it will take 10 to 15 days after receiving full payment. If your voltage is different from 380V/3PH/50Hz, the delivery time will be around 20 days for custom-made motors or electric components.

Q5. Can you produce according to the technical drawings?
A: Yes, we can produce by your technical drawings or requirements. We can make drawings for you.

Q6: How do you make our business long-term and good relationship?
A1. We keep good quality and competitive price to ensure our customers benefit ;
A2. We respect every customer as our friend and we sincerely do business and make friends with them, 
no matter where they come from.