Wld-PC New Steel Electrostatic Manual Powder Coating Spray Booth for Car Accessory

Product Description

WLD-PC New Steel Electrostatic Manual Powder Coating Spray Booth for Car Accessory Specifications:
NO.1 Filter element powder-recycling system Booth
1) Name:WLD type power-recycling equipment.
2) Equipment body size:L2420mm×W1800mm×H2000mm
3) Recycling adopts filter element power-recycling system,configured with polyester fiber filter element,filter  material from Taiwan.
4) Filter element cabinet design is flat basic type, convenient for Powder recycling.
5) Back flushing adopts high compressed air,the flushing time controlled by circuit board,back flushing gap fixed at 60 seconds,back flushing time 1 second.
6) Electrostatic powder painting adopts compressed air which processed by drying,drying air compressor equipped by 1.0m³\min.(air compressor provided by customer themselves)

7) Material bill technical index:

Number	Item		Material bill,specifications and parameter		Remark
1	Room body wall panel		Power coating galvanized steel panel		1.2mm
2	Bottom panel		Power coating stainless  panel		2.0mm
3	Lighting fixture		Autifog lighting fixture		2 lamps
4	Air tank		Seamless steel pipe		ø 140,outfall setting
5	Air pipe, piece		Galvanized pipe,piece		1 inch
6	Fan		Model 4-72-4A		1 set Power supply 380v
7			Air Flow:7419m^3/h
8			Full pressure :1320pa
9			Power 5.5KW
10	Filter element specs		φ325×600		4 pieces
Electricity and air system
1		Fan startup		AC contactor,thermal overload protector
2		Impulse back flushing		Electromagnetism impulse valve
3		Air pressure adjustment		pressure reducing valve

Advantages:
High powder recycling rate,can reach 95%,save material and energy,
The recycled powder can be used again and again,continuously working available;
Cover small place and low noise;
Safe and reliable,the service life over 10 years.

NO. 2. Chamber Type Fuel Curing Oven
1.Oven Size: L4600mm×W2400mm×H2200mm
Floor Setting Type:Front and back door both open 
2.Technical Parameter:
Max Temperature:220°C; 
Working Temperature:180-220°C;
Empty Loading Rising Time:≤45 min.
3.Technical Content:
Oven Body: a) Outside panel adopts δ0.476mm stainless steel,Inside panel adopts δ0.476mm galvanized stainless steel;
b) Insulating layer adopts volume of 120Kg/m3  rock wool,thickness 100mm;
c) Board and board connected by mosaic structure
d) The ceiling has two explosive-proof holes.
Oven Appearance:border white,oven body gray white.

2) Heating System
1. Technical Parameter:
Heating source:0# diesel;  Power supply:380V; Heating style: Hot air recycling
2.Technical Content:Recycling fan:rated loading  type water-cool Centrifugal fan  Model:4-72-3.6#C-3KW   QTY:1set
Air Capacity:5268m3/H, Full pressure:989pa, Burner:G20   Oil Consumption:8-16kg/h    Power:320w
3.In-out air duct:adopt δ0.8mm bended galvanized stainless,outer fiber cloth,heat insulation EPS,thickness 50mm;
4.In-out wind groove: adopt δ0.8mm bended galvanized stainless,Inside oven uniformly distributed,Adjustable air flow shutter,assure inside oven temperature uniformly;
5. Heat exchanger:200000 Kcal/hour/sett(1set);
6.Inside panel adopts δ1.0mm galvanized steel sheet,outside panelδ1.2mmgalvanized steel sheet;
7.Thermal barrier adopts 10mm thickness aluminum silicate,Temperature resistance 8000C;Thermal barrier adopts 150mm of volume of 120Kg/M3 rock wool;
8.Internal bladder made of stainless steel

3) Control Setting :

1.Automatical temperature control system,up and down limit temperature setting, digital display.
2.This product design accords to international standard,definitely safe when using.
3.Time meter controls constant temperature time,can turn off at a fixed time.
4.One control box,centralized control and easy operation.

Advantages:
Temperature rises quickly;extremely efficient in preserving heat;service life over 10 years;
Easy to operate and maintain;
After curing oven baking,the powder coated parts will be very durable and antirust.