Wld22000 Customized Italy Bus Paint Spray Booth Oven

Product Description

This is a custom booth. We have many standard paint spray booth models and we can also make customized spray booth. Welcome to send inquiry to us.
 

Project:22m×6m×5m
	Configuration
Technical requirements	1.Extraction from both side.
	2.All motors must be SIEMENS or WEG. All motors must be controlled with Variable Speed Drives/Frequency Inverters,made by  Schenider only.
	3.The airflow velocities are at least 0.4m/s downdraft velocity,in an empty booth
	4.Entrance door with electrical rolling door
	5.Each booth requires a minimum of 4×Personal Doors.
	6.All ceiling filter frames must be hinged,to open from the side of the booth. All ceiling filter frames must be manfactured from stainless steel,and not the normal power coated steel.
	7.The required Lighting may be no less than 1000 Lux.
	8.All air control dampers must be automatic.
	9.The primacy intake filters must be pocket type filters.
	10.The Touch Screen with PLC is provided,and must be Schenider.
	11.All the viewing windows will be aluminum alloy frame,and cannot be opened.
	12.The glass of the viewing window is 8mm clear tempered glass.
	13.All the materials must be able to survive fire for 60 minutes.Wall panels to be insulated with rock wool or mineral.
	14.Air intake and exhaust fire proof damper and fire shutter must be equipped with fusible connetion.Where there is a sparks,fusible connection will be activated,thus close the fire shutter.The fire shutter must be electric,to be operated on the control box.
	15.The booth must be equipped with Differential Pressure M and temperature sensor,to ensure the pressure in the booth is monitered all the time,and the reminder of changing the filter.
	16.The booth must be equipped with alarm system,pressure gauge,differential pressure gauge
Dimension of Room Body
Inside Dimension	22000×6000×5000(L×W×H)
Outside Dimension	22152×9750×5600(L×W×H)
Air Collect Cabinet
Design Type	Quadrate steel frame,at each side of room body
Fiter Area	101 square meters
Room Body
Structure	Quadrate steel support,dragon gate structure,panel vertical setting
Height of Plenum	600mm
Wall panel	Rock wool 75mm,0.6mm color steel,snow white
Roof Panel	Rock wool 75mm,0.6mm color steel,snow white
Edge Cover	Galvanzied steel bending
Entrance Doors
Door Type	Floding type Doors
Size	4000×4800mm(W×H)
Quantity	2units,entrance door,drive through type
Personal Door
Door Type	Frame Structure
Size	800×2000mm(W×H)
Quantity	2 units on each side,4 units in total,distance from the bottom of an open door to the ground to be 20 mm.
Description	With safe glass window,thickness:8mm
Ceiling Lights	All lights must be able to be changed from outside of the spray booth.
Quantity and Power	28units,4×36w/unit,4032w for total
Layout	2 rows,14 fitting on each side,total 28 fittings
Side lights	All lights must be able to be changed from outside of the spray booth.
Quantity and Power	34 units,4×36w/unit,4896w for total,
Layout	2 raws,on each side of room body
	The 22 m Spray booth must have end wall lights, installed on the sides of the folding door, each side having 1x fitting,2 fittings for one door,total 16 pcs of tubes for two doors
Illumination	>1000Lux
Filter System	Perforated deflector plates are to be installed on each inlet to the top plenum, as to ensure that even mixing of the air and laminar air flow through the ceiling filter
Pre-filter	G3 bag filter,has large dust resistance capacity and high efficiency.inital resitance: 30Pa,final resitance:200Pa,100% wet resitance
Ceiling filter	F5 class filter,Model-SP-600G,has large dust resistance capacity and high efficiency.Thickness:22mm.Inital resistance:30Pa. Final resitance:450Pa.Temperatuere resistance:120°C,temperature short peaks:140°C.Max:temperature holding quantity: 650g/squre meter
Side filter	Fiberglass filter: thickness:50/60mm,initial resitance:15Pa,final resitance:250Pa,temperature resitance:170°C,temperature short peaks: 190°C,max temperature holding quantity:3200-3600g/square meter
Exhaust filter	F bag filter,initial resitance: 43Pa,final resistance: 250Pa,80% wet resistance,color: white,flame resitance: FA
Description of ceiling filter frame	Stainless frame with hinges to change the filter easily.With defetor plate
Inlet System
Fan type	Turbo fan
Power of fan and description of motor	6×11KW,380V,50Hz,SIEMENS motor
Date of inlet fan	190080m³/hour,500Pa
Heating System
Material of heating exchanger	Stainless 1Gr18Ni9Ti(SUS304)
Power of heating exchanger	6×440KW
T temperature raising ability	25°C(from -5°C to 20°C under painting)
Max working temperature	80°C
Temperature raising time	10-15min(from 20°to 60°C) under baking
Model of Burner	RS34/2 gas burner
	The air generation units must also be fitted with white insulated panels,extraction plenums must be from White Powder coated Mild Steel panels, and must be bolted panels.
	All panels which can be opened to access the fans, internal filters or other internal items, must be opened using knobs, not needing any tools.
Heating recycle system	No
	Each of the spray booths must be fitted with 4 x temperature probes, which will record the internal temperature of the spray booth, at different points.These readings must be made available on the Touch Screen PLC.
Outlet System
Fan type	Turbo fan
Power of fan and description of motor	6×11KW,380V,50Hz,SIEMENS motor
Date of outlet fan	190080m³/hour,500Pa
Free Air Speed	+/-0.4mm/free
Noise	<75db(A) Add noise attenuation at the duct to reduce the noise. With sound insulation inside of fan
Duct
Outlet Duct
Size	1000×1000
Straight Duct	36pcs
Water Proof Cap	6pcs
Control System	All electrical components and switchgear must be from Schneider,10" Shneider HMI  Touch Screen
Actuate Standard
Function	Painting,heating painting,flash,baking,SIEMENS PLC control,lighting switch
Secure System	Over temperature stop function,failure alarm,outset indicator,safe temperature lower stop,emergency stop,filter pressure alarm,fan and heating chain control,finger pressure monitor,Solenoid Valve and Pressure Adjustment Control Driven Damper
	The system can indicate that when the fans are running and the doors are open,the alarm rings.
Pressure Ajustment System	Outlet electrical damper
Fire Proof	Fire damper for inlet,electrical damper for outlet
Other Facilities	CE standard wire,wire box,pipe
Additional	Additional 6m air duct for each air intak system to make it same as air exhaust duct
	additional 5 m duct for all intakes and exhausts.
	2 x Additional Sets of replacement filters per spray booth.