- Internal Size: L30000×W5500×H5000(mm)
- Wall Panel: 75mm EPS
- Roof Panel: galvanized steel sheet
- Front Door: 4-folder type, size: W4000×H4800(mm)
- Service Door: 4pcs, size: W800×H2000(mm)
- Air Intake System (6 sets): each set consists of 2×4KW intake fans, total 12 units of 4KW intake fans.
- BELIMO 20N electric damper.
- Air Exhaust System (6 sets): each set consists of 1×5.5KW exhaust fan, total 6 units of 5.5KW exhaust fan.
- Multi-layer fiberglass filter. Exhaust air from basement or two sides of wallboard.
- Heating System (6 sets): each set consists of 1 unit Italy RIELLO G20 diesel burner, 200000Kcal/h. Total 6 units of burners, 800000Kcal/h.
- Heat Exchanger: made of 1.5mm thickness stainless steel which features mroe heat dissipating surface, better heat exchange and better burner efficiency.
- Ceiling Light has 160pcs of 24W LED lamps
- Side Light has 88pcs of 24W LED lamps
- Air Purification: dual filtering structure, the primary filter can capture granules large than 10μm, ceiling filter capture granules bigger than 5μm, the air cleanliness in the working environment can reach 98%.
Optional:
WLD-3D-III Movable 3D Lift (two units,including left one and right one )
1.Main application and application of scope
3D car lift is supplementary equipment that used in automobiles, trains and other large or medium-sized work piece. It has high rigidity, stability, rational layout, easy operation, operation of safe and reliable etc. It is the most ideal lifting equipment for reduce the labor intensity and improve work efficiency;
2. Structure
The 3D lift consists of vertical support post, working table, upper rail, down rail, convey system and anti-explosion control box . It can move left and right, upper and down and towards the front also.
3. The basic technical parameters for reference.
Working table size (L×W): |
L900×W900 |
Longitudinal moving distance |
Depends on the internal length of booth |
Longitudinal moving speed |
8m/min |
Vertical lifting height: |
500-3000mm |
Vertical lifting speed |
5m/min |
Lateral extending distance: |
800mm |
Max. Loading: |
300kg |
Power supply |
380V/50Hz/3Phase,220V/415/60Hz/50Hz etc can be customized |
Total power |
1.5Kw+0.75Kw+0.37Kw |
Noise |
≤70db |
Remark: Usually the 3D lift is customized according to different spray booths and workpieces,so the parameters can be adjustable according to different conditions. We need to know below information before presenting an exact price :
1. The inner size of spray booth?
2. The max size of workpiece
3. The max loading do you need for the working table?
The internal width of spray booth must be wider than 5.5m. For example,if the bus width is 2.55m,then it will be 2.95m available for 3D lift. If the bus or workpiece width is more than 2.55m,please confirm the required booth width with us.