| Customization: | Available |
|---|---|
| After-sales Service: | After Sales Service and Others |
| Warranty: | 12months |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Paint Spray Booth
A controlled environment for paint application.
A few of the most common items painted in a spray booth are cars, trucks, boats, planes, parts and furniture, and the basic structural design of a paint booth is essentially the same no matter the size, industry or application. Paint booths are either fully enclosed (with walls or doors on all sides) or feature an open front (without walls or doors in the front of the booth). Paint booths can be standalone pieces or included as part of a conveyorized finishing system.
Using a spray booth ensures that paint jobs are done faster, safer and cleaner. The most important function of a paint booth is to contain paint overspray, keeping your employees and the environment safe. By confining the application of hazardous material to a controlled environment, paint booths prevent hazardous overspray from causing fire or explosion, control air-fuel/mixture so that a combustible combination cannot occur and ultimately, provide a clean environment in which to paint.
In addition to safety, quality can be significantly improved with a paint booth. Enclosed paint booths offer a contaminant-free environment for better quality paint jobs. Before air enters the paint booth, it is filtered through high-efficiency filters that prevent small dirt and dust particles from coming into the booth and landing in your paint job. Cleaner paint jobs also means less rework, saving businesses valuable time.
Often used to pressurize paint booths, air make-up units (AMUs) are responsible for moving air continuously throughout the booth and help the booth maintain an optimal spraying temperature. In addition to a paint spraying mode, most paint booths also have a cure mode, which helps the paint adhere and dry faster.
Lastly, the use of a code-compliant paint booth for paint spraying is necessary to meet local, state and national safety codes that are put in place to protect people and the environment.
Specification for China Manufacture CE Standard Car Spray Paint Booth for Sale:
| Internal Size | L6900×W3900×H2700(mm) | |
| External Size | L7000×W4000+1450×H3450(mm) | |
| Room Body | Wall Panel | 50mm thickness, sandwich panel, filled with flame retardant foam foam density18kg/m³, 0.476mm colorful steel skin board. |
| Roof Panel | air chamber 450mm high, galvanized steel roof panel | |
| Basement | 300mm high, galvanized steel sheet and square steel pipe construction. 2 rows of grids, 3 rows of checker plates, full ramp |
|
| Door | Front Door | 3-folder structure luxury front door galvanized steel sheet thickness: 0.8mm with powder coating treatment, size: W3000×H2650(mm) with tempered glass windows |
| Service Door | 1pc, made of wall panelwith pressure lock & absovation windows, | |
| Air Circulation System | Intake Fan | 1 set of 7.5KW direct drive turbo fan, air flow 25000m³/h |
| Exhaust Fan | 1 set of 5.5KW direct drive turbo fan | |
| Air Duct | galvanized steel sheet, 5pcs straights 750×750×1000(mm), 2pcs 90° elbows and 2pcs 45° elbows | |
| Heating System | Burner | Italy RIELLO RG5S diesel burner, 260000Kcal/h, heating time 5-7min(20ºC-60ºC) Max. temperature 80ºC, fuel consumption 4-5kg/vehicle |
| with oil tank & oil tank stand | ||
| Chimeny | 4pcs straights and 2pcs of elblows | |
| Heat Exchanger | made of 1.5mm stainless steel, exchange rate can reach 85%. | |
| Filtering System | white pocket filter, ceiling filter, floor filter, active carbon pocket filter | |
| Lighting System | Ceiling Light | 32pcs of 24W LED lamp tubes |
| Side Light | 16pcs of 24W LED lamp tubes | |
| Control System | Damper | BELIMO 20N electric damper |
| Control box | Electronic control panel. Cabinet type, standard control system, easy to control and maintain. Painting, drying, lighting, painting time and drying time setting ;emergency stop switch, failure indication, over-temperature alarm indication etc. |
|
Q1. What is your terms of packing?
A: Generally, we pack our goods by thicker bubble paper, some of them are packed by carton.
Q2. What is your terms of payment?
A: By T/T, 30% as deposit for production, and 70% balance before delivery. We'll show you the photos of the products and packages before you pay the balance.
Q3. What is your terms of delivery?
A: Normally our quotation is under FOB Guangzhou, but we also accept EXW, FOB, CFR, CIF, DDU.
Q4. How about your delivery time?
A: Generally, it will take 10 to 15 days after receiving full payment. If your voltage is different from 380V/3PH/50Hz, the delivery time will be around 20 days for custom-made motors or electric components.
Q5. Can you produce according to the technical drawings?
A: Yes, we can produce by your technical drawings or requirements. We can make drawings for you.
Q6: How do you make our business long-term and good relationship?
A1. We keep good quality and competitive price to ensure our customers benefit ;
A2. We respect every customer as our friend and we sincerely do business and make friends with them,
no matter where they come from.
){kind=link}